Chainsaws make cutting trees and other stubborn material easier. The damage that these machines can cause, however, is quite significant. Investing in a chainsaw glove set is the best way to shield your hands from injury. Here is a guide to finding the right protective wear along with a few recommendations.
Best Chainsaw Gloves Sets
Do you want chainsaw gloves that resist cuts and tears? Consider the Husqvarna protection gloves. These accessories are made of Spandex, which assists in their cut resistance in the left hand. The Goatskin palm also helps provide protection to the hands while you saw through tough surfaces to create a masterpiece. This pair of gloves comes in highly visible colors that can be seen from several feet away. The reflective “H” logo also ensures safety when using in poorly lit spaces.
Made of 30 percent nylon, 25 percent Polyester, and 8 percent cotton, this protective wear is interwoven to meet the average worker’s needs. The Youngstown gloves are cut-resistant with Kevlar fiber lined through its interior. The top, palm, and sides of the fingers are woven with Kevlar fiber to reduce the probability of puncturing through the fabric and getting to the hand.
The outside of the glove is also durable with non-slip reinforcements on the palm, fingers, and thumbs. You can pick up a glass structure and other fragile material with the assurance that it will not fall out of your hand and break. Adding to the guarantee of effectiveness is an ANSI Cut Level rating of 3 and an ANSI Puncture Level rating of 4. These gloves are the whole package with regards to durability, yet they have a soft side of Soft Terry Cloth sewn into the top layer of the thumb. You can use such feature to wipe away sweat that comes from a hard day of labor without fear of your face being scratched by the gloves’ rigidity.
The Endura gloves have fluorescent-like backsides created for optimal visibility. You can see this outerwear in poorly lit spaces so that you may spend more time focusing on the task at hand. The Nylon/Lycra fabric that covers the back of the gloves has a water-resistant, breathable membrane that keeps liquids out so that your hands can remain cozy and dry while completing the job.
Echo gloves are for those with large hands. Two layers of Kevlar fiber material are laced throughout the back to reduce the likelihood of vital veins on the hands cut with a saw. There are also foam pads on the palms of the gloves that work to reduce the inevitable vibration that comes with operating a heavy duty machine. Goatskin leather on the front surface of the glove provides a firm grip, while the reinforced fingertip and knuckle sections ensure that more times goes towards working instead of readjusting the glove. These accessories come equipped with Velcro wrist closures.
The Elvex glove has several layers of Polar protection on the backside of the left hand where injury due to chainsaw accidents is more likely. These accessories meet the world standard certification of CE EN 388:4244 and CE EN 381-7, Design B, Class 1-20 (m/s), and are available in Large and X-Large sizes.
Stability and durability are what the makers of Oregon chainsaw glove sets were going for when they created the 91305M version of the accessory. This protective outerwear has a reinforced palm area that comes with an elasticized wrist feature that ensures sturdiness and comfort.
Best Chainsaw Gloves Buyer’s Guide
The Chainsaw Glove Difference
There are many gloves on the market that claim to protect against cuts and bruises in the workplace. Few of these, however, can guarantee safety like the chainsaw glove. Built with fibers and other cut-proof fabric, chainsaw glove pairs take on the form of heavy duty trousers that can withstand the toughest environmental conditions.
The main difference that you may notice between a chainsaw glove and average worker’s glove is the extra attention placed on the left hand. Experience has proven that a person’s left hand is more susceptible to injury when using chainsaws to complete everyday tasks. Such is the reason why manufacturers implement additional padding in the structure of gloves meant for a worker’s left hand. Ensuring your safety in the instance of a chain slip is the highest priority of such makers.
Factors to Consider When Buying a Chainsaw Glove Set
There are a few things you should take into account before deciding on a pair of protective gloves. First, you should consider the quality of leather from which the glove is made. Any chainsaw glove that does not have some leather in its makeup should be avoided. Leather provides the most protection from cuts and punctures with its tear-resistant fabric and gives comfort like no other material with its snug fit. Getting a good grip on the chainsaw is one of the best ways to prevent slip-ups that lead to emergency room visits. Leather fabric is one of the least evasive materials around.
Another factor to think about when buying a chainsaw glove set is the lining of the protective wear. The lining of a chainsaw glove is its heart and soul. This internal material, therefore, needs to be strong yet flexible so that you can get the most out of your work day. It is normal for the lining of the left-hand glove to have more protection, though some manufacturers provide fair lacing for both the right and left hands. The central purpose of the lining is to either slow or stop the chain if it breaks through the surface and comes into contact with the interwovenness of the glove. Good lacing prevents injuries.
Kevlar material is also central to a sturdy pair of gloves. This form of fiber is often used when reinforcing the joints and seams of protective wear because of its ability to be firm yet flexible. Kevlar has two times the strength of nylon and polyester, which is especially beneficial when placing your hand in the line of fire that is a chainsaw.
In addition to fabric and design, a good pair of gloves will meet EN Standards. By definition, EN Standards are numbers that analysts give gloves that have endured a series of tests. The desired ratings for protective wear are as follows:
- EN381-7, which represents the suitability of gloves when under the pressure of a moving chainsaw. Classifications are in order from Class 1-16m/s to Class 4-28m/s, with Class 1-16m/s being the lowest grade and Class 4-28m/s being the highest. A score of EN281-7 falls within a high enough range to ensure safety under pressure.
- EN388, which stands for a glove’s physical resistance to hazardous material. Protective wear that resists deterioration under strenuous conditions is considered ideal.
- EN420, which represents a manufacturer’s compliance with safety regulations when crafting the glove. Protective wear should never impose injury or the risk of harm.
Cut-resistant, Puncture-resistant, and Needlestick resistant: What’s the Difference?
You know about gloves that protect the hands by resisting straight cuts to the fabric, but what about puncture wounds? It is possible to obtain a pair of protective gloves that provides excellent protection against slashes all while being susceptible to small punctures and needle infractions. How so? The answer is in the design.
Manufacturers who create cut-resistant gloves craft them so that a knife or sharp blade cannot penetrate the surface and, hence, harm the hand. Such creators do not always make protective wear that wards off direct punctures to the surface. You can, therefore, have stellar gloves with a lining that stops a loose chain in its tracks but does nothing to prevent the end of scissors from punching through the fingertip portion of the glove and injuring your finger. You can also have protective wear that resists both large objects that can puncture and sharp blades that can slash but lack the ability to keep the precise stab of a needle out of its quarters.
The various ways in which an injury by stabbing or slashing may occur in the work area is why manufacturers create gloves to fulfill diverse needs. The best chainsaw glove set is a three-in-one deal that protects against massive cuts, small punctures, and needle stabs.
The Need for Anti-vibration
Individuals who operate power tools on a constant basis are highly susceptible to developing Hand-arm Vibration Symptom (HAVS). High-arm Vibration Symptom is a condition in which the nerves in the hands become irritated to the extent of the sufferer being unable to perform basic functions such as buttoning a shirt or holding a glass of water steady.
HAVS begins as minimally invasive with your hands tingling now and then. Sharp pains that resemble needles piercing the tips of your fingers may also be an overlooked symptom. You may think that you need a vacation. The reality, however, is that the heavy vibrations of the power tools have damaged the nerves to the extent of requiring medical treatment. Failure to identify the initial signs of HAVS could lead to progression of the disorder, which includes whiteness of the fingers and loss of feeling in portions of the hand.
Those working with jackhammers, chainsaws, power drills, and sanders are highly likely to develop HAVS if protective gloves that have anti-vibration technology are not worn when completing tasks. The following industries use these tools more often than others:
- General Manufacturing
Injuries can occur in anyone who carelessly operates equipment on a continuous basis. Those who operate machinery at frequencies above 150 Hz may see symptoms of HAVS sooner rather than later. When at its full capacity, HAVS can negatively impact the nerves, blood vessels, muscles and joints in your hands, arms and wrists. Wearing a pair of anti-vibration gloves is the best way to combat the probability of HAVS becoming a reality.
General Rules of Safety When Operating a Chainsaw
An estimate of more than 20,000 chainsaw accidents occurs every year. An overwhelming number of workers are cut on the hands and legs with particular regard to the left side. Chainsaws are capable of causing fatal injuries, which is why you should always be vigilant and focused on the task at hand when working machinery.
Doing multiple things at once is never a good idea when working near power tools. Hundreds of skilled laborers are caught off-guard and injured on the job because they were trying to cut material with one hand while using the other hand to hold structures in place.
Following the directions prescribed by the manufacturer is the best way to get safe results from your chainsaw. You should never modify a chain to fit the job at hand. Such alterations not only violate the conditions of warranty but also present the risk of injury to the operator. Imagine modifying your machine in a manner that prevents the chain brake from properly operating. You may be unable to get the engine to stop when it matters most. Such is the reason for following the instructions outlined by manufacturers.
Safety is always a factor when you are selecting accessories to accommodate dangerous machinery. When choosing a chainsaw glove set, you want to make sure that you pick protective wear that suits your level of comfort while shielding your hands from punctures and cuts. This guide will help you determine which type of chainsaw glove is right for you and decide on a pair of accessories.